CHIPSOFT J2534 Mid adapter will be useful for those users who wish to get more possibilities than CHIPSOFT J2534 Lite device can provide. At this moment the CHIPSOFT J2534 adapter is one of the most affordable adapters in its class. Support of various programs working via J2534 standard makes it an irreplaceable tool for diagnostics and chip tuning, and its price allows you to start your own business with minimum financial expenses. Possibility to use various working modes of the adapter (J2534, K-Line adapter, CANHacker) substantially widens possibilities of its using.

Technical characteristics of the CHIPSOFT J2534 Mid adapter:

- modern powerful 32-bit ARM processor 72 MHz

- work under the rule of the real-time operational system (RTOS)

- support of the bus USB 2.0 Full-speed

- update of the adapter firmware via USB

- support of J2534 standard, partial support of J2534-2 standard

- protection from polarity reversal, static stress

- dual power to provide safe work (+5V USB socket, +12V/+24V OBD2 socket)

- support of power 24V to work with trucks and buses

- indication of the operating mode via 3 LEDs

- set programming voltage +5V-20V with the step 0.1 V onto pins 8, 9, 11, 12, 13 of the OBD2 socket, maximum current is equal to 20 ma

- support of Single wire CAN bus (SW CAN)

- support of the second CAN BUS on pins 3 - 11 of the OBD2 socket (can be also crossed to pins 1 - 8, 12 - 13 via soldering bridges on the OBD2 plate inside the adapter)

- Mini USB socket 

- OBD2 case

Support of the following protocols:

ISO 11898 (raw CAN) up to 1Mb/s

ISO 15765-4 (CAN)

ISO 14230-4 (Keyword Protocol 2000)

ISO 9141-2

GM UART

SW CAN

ISO22900 (Tech2Win)

The adapter has been tested with the following diagnostic programs:

- PCMScan

- ScanXL

- Toyota Techstream

- VersaTuner

with the following loaders:

- ChipLoader (in the full capacity)

- OpenBox (in the full capacity)

- CombiLoader, MultiFlasher, MMC2 Flasher have been tested in the capacity of the available modules (that is not in the full capacity)

- PCMFlash

with the dealers' programs:

Honda update

Toyota/Lexus - Calibration Update Wizard (CUW)

GDS2 (dealer's diagnostics of GM group vehicles)

Tech2Win (dealer's diagnostics of GM group vehicles)

The adapter can work in the following modes:

J2534 device

K-Line adapter

CANHacker

You can download the adapter driver here: http://www.chipsoft.com.ua/download/stsw-stm32102.zip

You can download the J2534 driver and firmware update here: http://www.chipsoft.com.ua/download/chipsoft_j2534_mid_kline_canhacker_tech2win_drivers_110.zip

You can download CHIPSOFT J2534 Mid user manual here: http://chipsoft.com.ua/download/chipsoft_j2534_mid_en.pdf

You can download the comparative table of Chipsoft J2534 Lite and CHIPSOFT J2534 Mid possibilities here: http://chipsoft.com.ua/download/chipsoft_j2534_compare_table_en.pdf